From food and beverage processing to general industrial liquid transfer, Seelye-Eiler can provide the pump for any fluid-handling application.
AIR-OPERATED DOUBLE DIAPHRAGM PUMP
Fluid to be pumped Specific gravity, concentration, viscosity, any abrasives/solids present, temperature
Target flow rate Flow rates are variable on these pumps.
Flooded suction or distance the pump needs to lift fluid. Most of these pumps can lift about 20’ -25’
Estimated or known backpressure on the discharge of the pump Feet or psi
What is the source of the compressed air needed to operate the pump? Available CFM and pressure
END SUCTION CENTRIFUGAL PUMP/DRUM PUMP
Fluid to be pumped Specific gravity, concentration, viscosity, any abrasives/solids present, temperature
Target flow rate
Estimated or required backpressure on discharge pump TDH in feet or psi
Flooded suction or self-priming pump required Pump to lift liquid into suction end from a lower elevation
Motor required ODP, TEFC, chemical duty, washdown duty
Motor horsepower, voltage/phase. We can determine the hp required by target duty point and specific gravity
SOLENOID-FIRED OR MOTOR-DRIVEN METERING PUMP
Fluid to be pumped Viscosity, temperature
Flooded suction or will the pump need lift fluid into the pump (in feet). These pumps can have limited lifting capability
Rate of flow needed Flow rates can be varied on these pumps
Estimated or known back pressure on the discharge of the pump Pump into open atmosphere or pipe/ line pressure
Does the pump need be externally paced via a PLC, flow control, or analytic controller?
Whether pumping highly abrasive materials, wastewater or chemicals, a wide selection of pumps is available through our extensive supplier network.
Contact us for help in selecting a pump for your next project.
Toll Free: 800-328-2728 | Fax: 952-881-3503 | www.seelyeplastics.com
Commentaires